HOME  PAC PACK  JOYSTICK/GAMEPAD SUPPORT
HOW TO ENABLE A JOYSTICK OR GAMEPAD IN PAC PACK

To use a joystick or gamepad in "Pac-Guy:Resurrection", "Pac-Guy:Atomic Edition", "Pac-Guy:Christmas Edition" and "The Original Pac-Guy" hit F8 to open the game's menu then choose "Players" or "Controls". To customize controls in "Pac-Guy 2:Pagoon", "Pac-Gal", "Pac-Guy 2:The Lost Levels" and "Pac-Guy Scrambler" hit "C" during the game. "Pac-Guy 2:First Contact" and "Pixel-Guy" do not have control customization.

Once you've done this a window that says "Default Controls" will open up. Click the box across from "Joystick 1" and underneath "1". If the box changes to an "X" click "OK" and you can use your joystick or gamepad in this game. If you get an error that says "Joystick not connected or driver not installed", even though you're sure your joystick is connected, please follow the instructions below:

  1. Left click on the "Start" button on your taskbar, this opens your Start Menu.
  2. From your start menu move the mouse over "Settings."
  3. From the new menu that opens, left-click on "Control Panel."
  4. If you see a picture of a joystick that says "Joystick" under it then double-left-click on it and go to Instructions #1. If you see a picture of a gamepad and a joystick that says "Game Controllers" under it then double-left-click on it and go to Instructions #2.

Instructions #1

  1. Change the selection menu under "Current Joystick" so that it says "Joystick 1."
  2. Change the selection menu under "Joystick Selection" to the general description of the type of joystick or gamepad you have installed.
  3. Left-click on "Calibrate" and follow the instructions to calibrate your joystick or gamepad.
  4. Once calibration has completed left-click on "Test." If your joystick or gamepad works correctly you may now have the game to use it as described on the top of this page. If it doesn't work then your joystick or gamepad might not work with Windows 95, please refer to the instructions or technical support that came with it.
  5. Click "OK" twice to exit installation and click the "X" on the upper right hand corner of the "Control Panel" to exit.

Instructions #2

  1. Left-click on "Add."
  2. In the selection box under controllers left-click on the general description of your joystick or gamepad.
  3. Left-click "OK."
  4. Left-click "Properties."
  5. Left-click the "Settings" tab at the top of the "Game Controller Properties" window that opens up.
  6. Left-click on "Calibrate" and follow the instructions to calibrate your joystick or gamepad.
  7. Once calibration is over left-click on the "Test" tab at the top of the "Game Controller Properties" window. If your joystick or gamepad works correctly you may now have the game to use it as described on the top of this page. If it doesn't work then your joystick or gamepad might not work with Windows 95, please refer to the instructions or technical support that came with it.
  8. Click "OK" twice to exit installation and click the "X" on the upper right hand corner of the "Control Panel" to exit.

During the game the "X" must appear in the box between "Joystick 1" and "1" if the Joystick is to move Pac-Guy.


Astral Entertainment is a registered trademark ™ of Astral Entertainment Inc. All downloads, original artwork, and HTML are copyright © Astral Entertainment Inc. 1996-2003. All rights reserved.

To contact us, please click here.
Privacy Policy